click here if you want to see your banner on this site

Author Topic: SkullsMinerLite MultiGPU&CPU Mining made easy  (Read 162 times)

skullsminerlite

  • Newbie
  • Posts: 1
  • Karma: +0/-0
    • View Profile
SkullsMinerLite MultiGPU&CPU Mining made easy
« on: May 06, 2021, 07:31:25 PM »
Download:
https://github.com/skullsminer/SkullsMinerLite

SkullsMinerLite - NVIDIA | AMD | CPU


**********************************************************************************************************************************************************
Fee:

  There is a 15 minutes per day fee (1%).
  I do my best to make SkullsMinerLite your best tool.
  Fee Distribution List: (https://skullsminer.net/skullsminerlite.json)
**********************************************************************************************************************************************************
SkullsMinerLite Monitors mining pools in real-time in order to find the most profitable Algo

 GUI and easy configuration
 Auto Benchmarks Each algo to get optimal speeds
 Fully automated
 Auto Downloads Miners
 Tracks and display earnings accross pools
 AutoUpdate
 Monitoring
**********************************************************************************************************************************************************
Easy configuration, easy start in two steps:

  Run SKMLasAdmin

  1. Enter your BTC address and hit Save Config
  2. Hit "Start"



If you are using NiceHash, ProHashing &/or HashCryptos, Open PoolsConfig.json in the config folder with an Editor and enter your wallet adress/api-key and save it.
Features list
**********************************************************************************************************************************************************
Supported pools:

   http://ahashpool.com/

    http://zergpool.com/

    https://zpool.ca/

    https://www.nicehash.com/

    https://miningpoolhub.com/

    http://blockmasters.co/

    https://prohashing.com/?r=VaP0CpNE

    https://unmineable.com/?ref=tiy3-p5qg

    https://www.hashcryptos.com/
**********************************************************************************************************************************************************
    Deep Data Analysis

    SkullsMinerLite provides deep data analysis to lead to the best mining decisions.
    DeepDataAnalysisPlus is the Core brain computing these calculations and criteria.
    Not only this does analyze prices, but aglos/coins performances or orphans rate as well.
**********************************************************************************************************************************************************
    GUI

    SkullsMinerLite has a GUI making it easy to configure and run.
    Relies on config files. Simply run SkullsMinerLite
    Set your wallet address and hit start!
    If you are using NiceHash, ProHashing &/or HashCryptos, Open PoolsConfig.json in the config folder with an Editor and enter your wallet adress/api-key and save it.
    For console lovers. Run SkullsMinerLite-ConsoleUp.
**********************************************************************************************************************************************************
    AutoUpdate

    AutoUpdate feature included
    Every 24h AutoUpdateCheck
**********************************************************************************************************************************************************
    Auto Ban miners

      There are cases where some miners might fail in some systems.
      I such cases, SkullsMinerLite will ignore this miner after a count of failure.
      Default value for max failure is 3 and can be changes in Config.json.
      "MaxMinerFailure":  3 - set to 0 to deactivate autoban.
      Bans are only valid for a session. SkullsMinerLite will retry the miner on restart.
**********************************************************************************************************************************************************
    Pause Mining

      Ability to pause miners while keeping other jobs running (pause button)
      This will stop mining activity
      DeepDataAnalysisPlus will still run in the background avoiding the learning phase on resume
      EarningTracker will still run in the background avoiding the learning phase on resume
**********************************************************************************************************************************************************
    prerun

    Ability to run a batch prior switching to a specific algo.
    For example, can be used to set per algo OC via nvidiaInspector
    Simply create a file named <AlgoName>.bat in prerun folder
    If <AlgoName>.bat does not exist, will try to launch prerun/default.bat
    Use overclock with caution
**********************************************************************************************************************************************************
    Per pools config (Advanced)

      - **This is for advanced users. Do not use if you do not know what you are doing.**
      - You can now set specific options per pool. For example, you can mine NiceHash on the internal wallet and other pools on a valid wallet. This configuration is provided as an example in Config\PoolsConfig-NHInternal.json
        - Available options
          - Wallet = your wallet address
          - UserName = your MPH user name
          - WorkerName = your worker name
          - PricePenaltyFactor = See explanation below
      - Algorithm = List of included or excluded Aglo on pool (see example files)
**********************************************************************************************************************************************************
        - Usage
          - The file Config\PoolsConfig.json contains per pool configuration details. If a pool is listed in this file,
      the specific settings will be taken into account. If not, the setting for the entry name default will be used.
      **Do not delete the default entry.**
          - Edit Config\PoolsConfig.json
          - Add an entry for the pool you want to customize
            - Example: for ahashpool, if you use Plus. The name is ahashpoolplus.
            - (**be careful with json formating ;)**)
            - Best way is to duplicate the default entry
      - Note that the GUI only updates the default entry. Any other changes need to be done manually
**********************************************************************************************************************************************************
    PricePenaltyFactor (Advanced)

      - When using advanced per pool configuration, it is possible to add a penalty factor for a specific pool. This simply adds as a multiplicator on estimations presented by the pool.
      - Example scenario
        - NiceHash as a 4% fee - Set PricePenaltyFactor to 0.96 (1-0.04)
        - You feel like a pool is exaggerating his estimations by 10% - Set PricePenaltyFactor to 0.9
**********************************************************************************************************************************************************
    DeepDataAnalysisPlus - ahashpoolplus / zergpoolplus / zpoolplus / blockmastersplus / miningdutchplus / nlpoolplus / prohashingplus

    Uses calculations based on 24hractual and currentestimate ahashpool prices to get more realistic estimate.
    Includes some trust index based on past 1hr currentestimate variation from 24hr.
    AND is NOT sensible to spikes.
    This shows less switching than following Current Estimate and more switching that following the 24hr Actual.
    Better profitability.
**********************************************************************************************************************************************************
    Pools variants

    24hr - uses last 24hour Actual API too request profit
       -Low switching rate
    plus - uses advanced calculations to maximize profit (DeepDataAnalysis)
       -**Best switching rate**
    normal - uses current estimate API too request profit
       -High switching rate
**********************************************************************************************************************************************************
    Developers and Contributors fee distribution

    There is a 15 minutes per day fee (1%)
    Fees are distibuted randomly to a public list which can be found here:
    https://skullsminer.net/skullsminerlite.json
    I want to stay completely transparent on the way fees are managed in the product.
    Fees cycle occurs once every 12 hours for the selected amount of time (7.5 minutes).
    The first donation sequence occurs 1 hour after miners are started.
    If Interval is set higher than the donation time, the interval will prime.
    Example for default parameters:
    Miners started at 10, First donation cycle runs at 11 until 11:08, Next donation cycle occurs 12 hours after.
    All donation time and addresses are recorded in the logs folder.
**********************************************************************************************************************************************************
    Miners Monitoring

    There is a local WebInterface (localhost:yourport/status) and a MonitoringServer (https://www.skullsminer.net)
    SkullsMinerLite does not send any personal informations to servers. Only miner related info are collected as miner names and hashrates. Miners path are all expressed relative so we have no 
    risk to send any personnal informations like username.
**********************************************************************************************************************************************************
    Algo selection

    Users might use the Algo list in config to Include or Exclude algos.
    The list simply works with a +/- system.

    +algo for algo selection
    -algo for algo removal

    If "+" Used, all selected algo have to be listed
    If "Minus" Used, all algo selected but exluded ones.

    Do not combine + and - for the same algo

    Examples:
    Mine anything but x16r:         Algo list = -x16r
    Mine anything but x16r and bcd:  Algo list = -x16r,-bcd
    Mine only x16r:               Algo list = +x16r
    Mine only x16r and BCD:         Algo list = +x16r,+bcd
    Mine any available algo at pool: Algo list = <blank>
**********************************************************************************************************************************************************
    Earnings Tracking

    Graphical displays BTC/H and BTC/D as well a estimation of when the pool payment threshold will be reached.
    Supported pools:
          ahashpool
          zergpool
          zpool
          nicehash
          miningpoolhub (partial)
          BlockMasters
          ProHashing
    If you are mining more than one pool,it shows stats for any supported pool
    Press key e in the console window to show/hide earnings
**********************************************************************************************************************************************************
    Support running multiple instances

    **Experimental**
    More than one instance of SkullsMinerLite can run on the same rig
    Each instance must be placed in it's own directory
    Miner has to be started prior the launch of the next instance
**********************************************************************************************************************************************************
    Optional miners (Advanced)

    Some miners are not enabled by default in SkullsMinerLite for a variety of reasons
    A new folder can be found called "OptionalMiners" containing .ps1 files for some miners
    For advanced users, refer to OptionalMiners\Readme.txt on how to use
**********************************************************************************************************************************************************
    Algo switching log

    Simple algo switching log in csv switching.log file found in Logs folder.
    You can easily track switching rate.
**********************************************************************************************************************************************************
    Console Display Options

    Use -UIStyle Light or -UIStyle Full in config.json
          Full = Usual display
          Light = Show only currently mining info (Default)
    UIStyle automaticaly swtiches to Full during benchmarking.
**********************************************************************************************************************************************************
    In session console display toggle

    Press key s in the window to switch between light and full display
    Press key e in the window to show/hide earnings
    Will toggle display at next refresh
**********************************************************************************************************************************************************
If you have Windows 8, or 8.1, please update PowerShell: https://www.microsoft.com/en-us/download/details.aspx?id=50395

Some miners may need 'Visual C++ 2013' if you don't already have it: Visual C++ Redistributable for Visual Studio 2012/2013: https://www.microsoft.com/en-US/download/details.aspx?id=40784

Some miners may need 'Visual C++ 2015' if you don't already have it: Visual C++ Redistributable for Visual Studio 2014/2015: https://www.microsoft.com/en-US/download/details.aspx?id=48145

Some miners may need 'Visual C++ 2015 update 3' if you don't already have it: Visual C++ Redistributable for Visual Studio 2015 update 3: https://www.microsoft.com/en-us/download/details.aspx?id=53587

Running multiple cards its recommended to increase Virtual Memory 64gb is optimal

Requires Nvidia driver 431.86 or above: https://www.geforce.com/drivers

Some miners may need Cuda Drivers https://developer.nvidia.com/cuda-toolkit-archive CAUTION: During the CudaSetup choose CUDA to be installed only!
**********************************************************************************************************************************************************
Licensed under the GNU General Public License v3.0 Permissions of this strong copyleft license are conditioned on making available complete source code of licensed works and modifications, which include larger works using a licensed work, under the same license. Copyright and license notices must be preserved. Contributors provide an express grant of patent rights. https://github.com/skullsminer/SkullsMinerLite/blob/master/LICENSE
« Last Edit: May 14, 2021, 09:05:46 PM by skullsminerlite »

 

Bitcoin Garden 2013-2024, All rights reserved | Privacy Policy | DMCA | About Bitcoin Garden | Support & Services